top of page


2 Channel Ingest & Playout System


2 Channel Ingest.  It can capture sync or non-sync  studio cameras,  satellite channels, network incoming programs or any other video source. InVisionLight  can run 24/7 with automated split File function to cut every 10, 20, 30, 60, 90 or 180 minutes files. The recorded video will split precise by frame and  the new files will be made without losing any information (frames).


InVisionLight  supports  2 video inputs and 1 output.

We support wide range of video codecs among them  XDCAM HD 422-50, DNXHD and IMX 30/40/50 .

Our recommended file format is MXF but it can be other formats.

InVisionLight support most of the broadcast hardware such as Black magic design, AJA, BlueFish 444, Deltacast, DecTec,  Magewell , and NDI.

Our recommended interface is HD-SDI but it can be analog as well.


InVisionLight based on Windows environment and produces video files supported by market - leading editing systems

Avid Media Composer ,  Adobe Premiere , DaVinci Resolve and the Final Cut.

The interface is easy to use and fits perfectly within the studio infrastructure and existing Post - production facilities. 


The recorded files are made as below:


 (File name_Date ( (h.m.s)_Sub name_Take number)


This  file structure gives wide range of  indexing and searching options



The InVisionLight interface:

The main window of InVisionLight software as following picture shown. On the left it is the main control panel by which users can set parameters or doing control of Record and Stop. The 2 video windows provide video and 8 audio tracks monitoring as well as other various recording information. The software is neat and user-friendly control easiness.
















InVisionLight's network settings:

InVisionLight Server adopts Windows-7/10 as its OS, and capitalize “Management Gigabit Switch” to fabricate “local area network”,

users are recommended to configure the network according to Window rules that include:
1. IP Address of the computer network should be located within the same LAN.

2. Set up computer user name, user group / account / authorization.

3. Set up public folder in computer’s hard drive.

4. Set up firewall for network switch, and the traffic control for network access.

InVisionLight's recommended System:

Prosesors  Core I7-i7 7700k

Motherboard - Asus Prime Z270-P

Memory -4.00 X 8GB DDR4-2400MHZ ECC REG

Display Card -NVIDIA PNY Quadro K420 1GB DDR3 PCIe 2.0

Media Disks -1X Seagate 3.5" 4TB SATA 6Gb/s 7.2K RPM 128MB

System Disks -1X SSD Samsung PM863a,240GB,SATA 6Gb/s,VNAND,2.5 

InVisionLight GUI
bottom of page